Reading in sidir. The drive stopped reading: what's the robit? Programming problem
Hello everyone!
Today my article will be dedicated DVD repair .
DVD Repair my practice trapleyaetsya quite often. Faults are different: it does not turn on, does not spin the disc, does not read the disc, does not read DVD or CD, etc.
Methods for fixing such breakdowns were described in the article, and the whole material of assignments to the most widespread fault of the DVD - dvd player won't read discs . It's possible that your device can't read anymore dvd discs , a cd I do good. Chi navpak. The best thing is that these inaccuracies are introduced through the input of the laser diode emitter.
What can you do, if on the display of your dvd player appears to be the type NO DISK?
Based on practice, it was noted that the average life of a laser head is from three to five years (Obviously, the statistics of Chinese cheap devices are not taken here, as they are not transferable). It is also noted that with skin fate, the term for the service of laser heads changes, as well as their price.
Repair DVD
Otzhe, vіd cob, after sorting dvd player , it is necessary to reconsider, so that the laser at the head is not confused with a saw. As if, marveling at the lens, you drank or drank like small particles, then the laser must be wiped with a DRY cotton swab. NEVER WIPE THE LASER WITH ANY ROCK, ALCOHOL, BURNER, OR COLOGNE. TSE I WILL BRING THE LENSI I TO THE HADDENNESS, AS A CONSULTATION, THE LASER HEAD WILL BE BROKEN!
Another way to clean the laser is to purge the head. It’s not necessary to blow from the company, for that one can take a vologer on a lens. The best way is to compress the impressions from a spray can or the other available method.
Then it is necessary to change the motor, which will spin the disc. Possibly, the wine is not spinning because of this swidkist, as it is put, otherwise it is not necessary to spin. Reconsider the best replacement for a reference engine. If you know the same thing, then you can determine the correctness of the motor, vimiryavyi yogo opir.
So, it is necessary to reconsider that the nozzle of the engine did not stick to the stem, and that the nozzle did not break down to the base of the engine. Tsya vіdstan may be appointed and її damaged to the point of unreadable discs.
Even though all the visualization procedures did not give a result, and the dvd player, like before, did not saturate the disks, then, more for all, the emission of laser diodes or the photodetector was broken. In case of a change, in order to correct any inaccuracies, it is necessary to replace the optical convertor, or, in my simple words, the laser head.
DVDs and CD-carriers are still being played for the protection of lovers and old video recordings, which is a source of information about those who work, because the disc is not readable, as before, it is more relevant.
What robiti, if the disk is not readable?
We need to reconsider that the disk drive of your computer is correct. It is easy to misinterpret it by inserting other similar information up to the new one.
Is the disk drive correct? Twisting that poshkodzhennya like on the worker, so on the opposite sides can become the reason for the impossibility of reading. It is possible to repair the surface with insignificant scuff marks, carefully covering the poshkodzhenі mіstsya with a barless, ale not matte varnish for nails.
Ale є th іnshі ways of mechanical diї:
- Polishing. Wipe the disk with a non-fluffy servlet. You can beat the special ones - for wiping the monitor. Ruhi robіt not on the stake, but across the roads. Gently apply a polish on a small area to avenge the sun. Raise a sprat of polishing ruhiv, taking away the excess bones.
- Freezing. The disk is placed in a paper envelope near the refrigerator for the first time, then inserted near the disk drive and saved to the computer.
- Deyakі vikoristovuyut applied toothpaste (inexpensive, without additives, white) or brilliant green.
What else can you rob, schobi read the disc?
Іsnuyut and programmnі vіdnovlennі vіdnovlennya zapisіv:
- You can read the following information for the help of the Unstoppable Copier program, which can be downloaded without cost. If it’s not all, then save most of the information on a hard disk.
- Buvaє, scho the disk drive loses the ability to read disks after installing some programs chi igor. Guess what you installed on the previous day and try to see. Let's try to be the point of early renewal of the system and the next re-advantage of the computer. For a guarantee, you can remove the DVD drive from the Attachment Manager, and after reinstallation, everything will be automatically restored.
- Utilities Microsoft Fixit.dvd.Run, Nero Drive Speed and CDSlow fix disk problems and update automatically. It is necessary to recieve, until the attachments will be scanned. Remaining that irrevocably poshkodzhenі cluster program reset. If the information from the laser attachment appears on the computer's hard disk, the update can be completed, for example, the CDCheck utility.
- Having created an image of a CD with the help of Clone CD, Easy CD Creator, Nero or CDRWin, you can transfer ISOBuster or WinISO information. For whom you can help to find a plugin for ISO-files from Windows Commander.
- The BadCopy Pro program will help solve the problem. For the help of dialogic vicons, you will have to give us your words.
Wikidat poshkodzhene zherelo іnformatsії zovsіm not obov'yazkovo, although it's not a fact that your patience will be more wine-growing.
Regardless of the great popularity of solid-state storage devices that are connected via USB, and the expansion of low-end technologies, DVD discs are still actively vicarious with a lot of hard drives. Music albums and computer games are being expanded on them, licensed software and operating systems are being sold. Whether a laptop or a computer does not saturate disks that are inserted into a new one, it is an unacceptable problem. The article describes how it works, so that the drive does not bleed and does not read CDs.
It is necessary to solve a large number of possible problems, through a laptop or a CD-ROM on a computer, do not download disks and do not work in the correct order. Before them, you can see: the error of the disk itself, the filing of the head, what it reads, the physical error of the attachment itself, the presence of the contact and the incorrect operation of the drivers. Dalі at the stati, the skin cause is reportedly examined and it is described what works in the case.
Non-working DVD
DVD discs - finish the trendy data. In case of inaccurate vikoristannі that zberіgannі їх the surface is covered with the absence of tribnih podryapins, through yakі cd-rom not to download the recorded information. For diagnosing the cause of the cause, it is necessary for the coristuvachs to simply try to insert another nose into the drive. Like with them, the laptop works and retrieves information - it means that the problem was with a particular disk. 
What is the job of this guy? Try polishing your nose for help with soft ganchirka and special pasture.
Visibility of a contact
Like a tray in a CD-ROM, it vibrates when a button is pressed - apparently, there is a contact with the life block. In this case, you need to work on your feet: unplug your personal computer, remove the battery cover from the case of the system unit and turn it over, until I attach the cables. 
There may be two: one goes to the power block and provides cd-rom electricity, and the other - informational - is connected to a special socket on the motherboard. Just unplug the wires and plug them back. If you are looking for a laptop, and not a stationary computer, it is recommended to turn to fahivtsya and not crawl inside the device on your own.
Drank on reading head
The most common reason why a disk drive does not read discs on a computer is that the cd-rom reads information. There are two ways to clean it: I’ll hand it for help with special attachments.
For the first time, the koristuvachs need to work on their feet: take out the lid on the computer, turn it on cd-rom, take it out for help with cotton wool or soft tissue, gently wipe the head. If you are not sure that you can easily pick up and get a laptop - it is recommended to turn to a professional. 
Another way available to everyone is to bring a special disc with stickers pasted on it. You need to insert yoga into a CD-ROM, buckle up the current hour and pull back. A computer or a laptop should be cleaned up, spinning yoga, and small shields to see all the saws, which are clogged.
Laser not working
A laser is installed inside the CD-ROM, for the help of a laptop or a personal computer, it reads data from the surface of the disk. If you can feel that it’s working (to spin), but the yoga system doesn’t work - it means that it’s better for everything, the laser is not working and working incorrectly.
Also, until the date of this breakdown, you can take a vibratory account of the data. Although a CD-ROM works with a CD, but if you don't download the DVD format, you can't talk about internal problems. It is not recommended for this person to work independently. It is necessary to show the laptop to a specialist, or just bring a new drive.
Problems with drivers
There is one more possible problem, which may not be with physical disabilities, but with an incorrect robotic system. Due to viruses and software failures of the driver, which ensure the correct functioning of the device, could be damaged. In which case it is necessary:
CD / DVD-drives are no longer practical in everyday life, but in certain situations one cannot do without them. Through rіdkіsne vykoristanny deyakі koristuvachі stikâyutsya z problem, if the drive does not read disks. What work, when it comes to Windows 7, as well as about prevention methods, is described in the article.
Why the drive does not work
The problem of reading disks may be a few options, but we can look at the possible causes of the error:
- poshkodzheny disk;
- physical failure of the drive;
- problem with the driver;
- beat the robotic OS.
Please! Before carrying out further manipulations, reverse the practice of the disc itself. Possibly, the problem is with the newcomer.
How robust, how not to work the drive
Іsnuє kіlka ways to rectify the problem. Let's take a look at the order of frequency of vinification.
Get respect! All other descriptions are for the Windows 7 operating system. Windows 8 and the newer program interface may be different.
Hardware revision
The problem with the flood is most often blamed on two slopes:
- poor connection to the drive (lay down to the PC);
- I’ll build the internal poshkodzhennya.
For the first time, there is a plume of life (left-handed in the photo) and / or transmission of data (right-handed) may not be inserted until the end, or the mother is physically weak. It remains to lie, more importantly, less to the train of transmission. It appears before the quiet crackle of the hour of the death of this cable, what to say about the need to replace it.
In another case, the drive cannot read data from the disk through the accumulated saw, which is placed on the lens, or through the burnout of the laser chip, which is read. In times of such situations, it’s easier to buy a new one, so it’s more expensive to do this repair.
Notice to the drive
Іsnuє mozhlivist, scho privіd vіdklyuchivsya on the software level. Such a traplyayetsya through the systemic zbіy or nenavmisny vliv koristuvach.
- Press "Start" → "Panel keruvannya".
- Go to "Systems and security".
- Open Attachment Manager → click on DVDs and CD-ROMs.
If there is nothing on the list that the drive wants, hit the next step: Get respect! The presence of the item "DVD and CD-ROM drives" in the list means that the computer does not show attachments on the hardware level, about which it was said more.
- After this reading of disks may be practised.
Reinstalling the driver
The need to reinstall the PZ, which is responsible for the practicality of the drive, is required in case of failures in the system (more likely - through viruses) or OS upgrade.
Vidalennya PZ
The problem of vikoristannya drive іnоdі vinikaє through vstanovlenі multimedia progry, scho vіrtualіuyut іnіtіvіnі pristroї. Most of them are: Nero, Daemon Tools, CDBurnerXP.
For the removal of such a PZ, it is better to use a third-party utility (for example, the Uninstall Tool), and not a Windows tool.
- Run "Uninstall Tool".
- Select a program for creating virtual drives → "Deinstallation".
- Launch remote. Confirm your choice.
- There will be searches for files and records, which are left out, in the registry about the deleted software. When such elements are revealed, they should be removed.
- After the uninstall procedure is completed, close the window and the utility itself.
- Restart computer.
System upgrade
Vikonannya ahead of time does not guarantee the situation is corrected, because Windows can be the mother of a critical pardon. Use the system upgrade tool to help you.
Important! This procedure is only possible in that case, as on the PC there is already a point of inspiration, created earlier.
- Open "Start" → "All Programs".
- Go to the folder "Standard" → "Services".
- Run "System Update".
- At the top, press "Dal".
- Select stop → "More" from the list of points of remembrance.
- When the process is completed, press "Done".
If the computer is re-installed, it may be re-charged.
Important! If there is no point of departure on the PC, then a reinstallation of the system is required. How tse robiti, looked at the article "Statt".
Visnovki
In this article, a few ways to solve the problem caused by reading CD / DVD drives were considered. Approved options are suitable for PCs and laptops. Next, check the physical reference of the drive, after which you can go to the program procedures.
Irrespective of those that the CD / DVD drives are blocked step by step to other ways of reading information, it is not less, for low operations it will, like before, do it more up-to-date, for example, for the installation of an operating system that is stored on the disk. For that, I’ll build it out of the way of the tsgogo, but it’s even more unbearable. Let's figure out what causes those that the drive does not read discs, and how to solve this problem in Windows 7.
We do not pay attention to such a banal reason for the problem of reading information from an optical storage device, like a defect in the disk itself, but rather to a malfunction of the disk drive of that system. Among the main causes of the problem, which we are working on, can be:
- Hardware failure of the drive;
- Zbіy y robotі OS;
- Problems with drivers.
Below we will look at different ways of solving the problem and as clearly as possible.
Method 1: Fixing Hardware Problems
Nasampered, zupinimosya on virishenny hardware problems. The reason that the drive does not read discs may be out of operation, or the connection is incorrect. On the other hand, it is necessary to convert the transfer of cables to SATA or IDE ports. The stinks are guilty but are inserted into the nests as much as possible. You can also try reconnecting the attachment to an alternative port (sound the sprat). As the cause of the problem lies in the cable itself, you can try to clean the contacts, or rather replace it with a new one.
Vtіm, as much as possible, that the disk drive was broken. One of the indirect confirmations of which may be the fact that you read DVDs, but not CDs or otherwise. Don't talk about defects in a robotic laser. Incorrectness can manifest itself in different forms: in the output of the fret of microcircuits through overheating, before settling, the saw on the lens. For the first time, without the services of a professional master, you will not be able to do it, or better yet, get a reference CD / DVD-ROM. For another person, you can try to clean the lens with a cotton swab yourself. It is problematic to remove the stink from some models, but the stink shards are not attached by pickers for picking.
Option 2: Notification in the "Appendix Managers"
Vtіm, navіt dіy dіy dіy vіdklyucheny u "Dispatchers of annexes". Therefore, it is necessary to re-verify the variant and in different ways, you need to activate the drive.
- click "Start". Visit at "Control panel".
- Go to "The security system".
- Now emboss "Appliance Manager".
- run "Appliance Manager". At the list of possessions, click on the name "DVD and CD-ROM drive". There will be no such name, or when it is pressed against it, the name of the drive will not appear, which means either a hardware failure of the drive, or it will be turned on. Order for the first time, marvel Ways 1. If the DVD/CD-ROM is simply disabled, then the problem can be eliminated immediately.
- Emboss at the horizontal menu "Diya". Choose "Update configuration".
- A new search for outbuildings will be created.
- After that, click again on "DVD and CD-ROM drive". For the first time, as for the hardware part of the drive, everything is in order, it can be imagined by its name.
Method 3: Reinstalling drivers
The offensive reason, through the disk drive, the disk may not be able to be downloaded, є the driver is incorrectly installed. And here it is necessary to reinstall them.
If this method is not added, you can use special programs for automatic search and installation of drivers.
Method 4: Viewing the program
The problem with reading discs through the drive can be caused by the installation of a number of programs that create virtual drives. They include Nero, Alcohol 120%, CDBurnerXP, Daemon Tools and others. It is also necessary to try to see the PZ, but to do it better not for the help of Windows, but for the creation of specialized programs, for example Uninstall Tool.
- Open the Uninstall Tool. At the list, which you can see in the program, find out that program, how to create virtual disks, see it and emboss "Deinstallation".
- After that, the regular installer of the selected program will start. Diet wisely until the recommendations that appear in the window.
- After the removal, the Uninstall Tool program scans the system for the presence of redundant files and entries in the registry.
- If there are no visible items, the Uninstall Tool will display a list of them. To clean up again from the computer, just press the button "Vidality".
- Since the procedure for removing excess elements will be closed, you need to exit the information window, which will notify you about the successful completion of the procedure, simply by pressing the button "Close".
Method 5: Update the system
In some cases, when the programs are removed, the problem with reading disks can be saved, the shards of this software have been able to make changes to the system. For some reason, there is a sense of growing up the OS to the point of renewal, created to the point of vindication of the described malfunction.
- Emboss "Start". Visit at "All programs".
- Go to catalog "Standard".
- Open folder "Services".
- Find a message "Innovation of the system" and click on them.
- The standard OS update utility will start. Emboss "Dali".
- The next window will display a list of renewal points. I see the rest of them, as if they were created before the fault with the disk drive was blamed, then press "Dali".
- At the next window, to start the procedure for updating to the selected point, press "Ready".
- The computer will be reset and updated. If so, you can check the drive for practicality.
As a matter of fact, the reason why a disk drive stops running disks can be different factors, both hardware and software. But if the hardware problem is far from being a problem of building a building on its own, then for software pardons, develop algorithms that can be practically operated on.
