≡× MENU

• Caesar_v roztin
• Calendar chips
• Blood tests
• Sleepy period
• Preparing for the fall

How to change the strings of the guitar. Replacement of strings on an acoustic guitar

Is it time to change the strings on the electric tar? Well, let's figure it out, if you need to change them, how to work, what needs to be understood before the cob, how to raise the height, and how to choose, what kind of tool will be needed? What systems of fixing strings are used and why are replacements so special on different typewriters? Let's talk about everything in order.

Signs of "sunk" strings

Nasampered, varto understand that the strings are a vitratny material, which is necessary to change once for 2-3 months with an active frenzy, and then change it once for a drink, as if the guitar is playing “according to the mood”. It’s necessary, because the stench is “salted” or clogged with ford, the covering of the windings is erased, in such depressions they oxidize and rust. Vidpovidno the sound at the same time becomes less receptive, deaf;

See the string trimmers

First, let's start before replacing, let's be more specific, which option for the bridge (string holder, typewriter) of installations on electric batteries.

perceptibly4 vidireinforcement:

• Critical case (Tight-End, Gibraltar Standard bridge, Fixed bridge);
• tremolo machine (vintage tremolo system, FAT-10 tremolo bridge);
• two-sided machine (Floyd Rose, Edge-Zero, Edge Tremolo Bridge);
• fixation on the deck (Stop Bar, Stop tail).

In addition, on the skils You correctly replace the strings on your electric tar - stale buildings trim the way, and, ymovirno, the term of their service.

A tool that will be darkened

• Shmatochki to cut the strings for easy twisting, and cut the tails;
• a set of hexagons for the neck and the height of the strings;
• a metal line with a gradation in the cob, to adjust the strings in height, so that the stench can be derenched, or too high raztashovani;
• string winder. Rich is not a headache, but help you to spare the hour.

Before that, how to cut the strings of obov'yazkovo loosen! It's important! oskіlki string can fly and zavdat you shkodi. Dotrimuytes zahodіv safe, hoch i zdaєtsya scho on the right dribnitsa!

Znyattya

In all types of string holders, we simply cut the strings of the nut (behind the first fret of the fretboard) by touching the hand on the third fret, so that the stench does not fly and do not give you a call.

Then open it through special doors in the back plastic (like you have a tremolo machine) or from the back side of the body.

The master of the Floyd Rose system needs a hex wrench to loosen the tightness on the breeches. In some Zero Pro systems (analogous to Floyd Rose from the Ibanez company, such machines are often played on Cort guitars), the strings are pressed together with clamps (the ends of the strings, which allow you to trim the string in the bridges, in this case you have to turn the bolt, which will reduce the clamping to the end) . As you know, read below.

If the strings were implanted, they would not stop until they were re-installed, or they could be painted in the handiwork.

Electricity preparation

After that, yak Vy took the strings - to stretch the bolt strings on the fretboard of that body. Twist them arrogantly, but without fanaticism. It is also respectful to wonder what to twist and what not. For example, you don’t need to turn the height adjusters of the sound pickups, you just want to look like a big bolt. You are not recommended to turn the tremolo machine bolts.

Below in the photo it is shown what can be twisted without shkodi

Lining leakage

The next stage is the bleed-through of the fretboard with lemon olive. It is necessary for the lining to serve you longer, to avoid drying out and cracks in the lining. Like a vulture of lacquering - you don’t need it. Leakage is so very pleasantly indicated on the sound of the guitar. Servettes are soaked with lemon oil. You can find it practically in the skin shop of musical instruments. It is recommended to take Ernie Ball servets. There are 6 pieces in one box. The price is approximately 150 rubles or 2 USD.

Relatively leaking the leather fret of the fretboard, put the guitar whiplin on 40, so that the ol_ya took off. Wipe those who cannot climb with a dry, clean ganchirka.

Protection of mechanisms and thresholds

Take a trio of olives, ideally for sewing machines, but also for smaller motors. By small drops, with a syringe, drip on the seats and on the neck of the guitar. Tsim you to avoid the appearance of scoring and continue the term of the robot and accessories to the tool. It is especially important for budget guitars, all components are made from cheap materials. Ale, do not varto pour olive oil, you don’t have much to consume.

Cob vstanovlennya

We prepared the instrument with you and the time has come to put the strings on your favorite electric tar. Oskіlki stringotrimachі raznі, we will describe how to remember them for the skin type of okremo.

Important! The strings on the quills are wrapped in the castle! In such a time, it is better to trim the fret, without deferring to the dexterous pegs.

Zav'yazuemo lock on the strings

We did not begin to paint the leather croque, so you can easily understand from the photo and video below how you want to know. If you are missing food, then write in the comments, we will help you.

Critical body, tremolo or fixation type Stop Bar

On all of these string holders, change their vartos in the reverse order in the reverse order.

1. Nadity in the open;
2. Tighten the first and sixth string (to avoid deformation of the fretboard);
3. It’s tight that you missed out on the 2-3-5-4 scheme (So it will be easier for you, and the neck is stronger);
4. I’m looking forward to zaivu dovzhina (because it’s not aesthetically beautiful, the strings that are being worn can be unsafe for your health or the health of your loved ones.);
5. Let's get the guitar.

Movement Floyd Rose, Edge Zero, Edge Pro and others similar

The masters of electricians with such a machine can be greeted and cheered up at once. With the possibilities, like giving a two-way machine, go for a couple of problems, like changing the strings. Ale no big deal! We take hexagons, wire cutters and get a replacement!

1. To use a hexagon on the cob, twist the fixators from the nut of the fretboard, as if there is a stink there;
2. Let the strings loosen and taste, if you want to change them, you can easily twist them out of the bridge;
3. Loosen the clamps on the breeches and win the strings;
4. I like fixators on new strings, dress in bridge and fix a hexagon;
5. It is tight in order 1-6-2-3-4-5, tied with locks;
6. Nalashtovuemo strings on the electric tar;
7. Vazhel the machine is robbed of a kіlka pіdyazhok, then we'll renew the pіdlashtovuєmo elektrogitra;
8. Micropidbudovu on the breeches is placed in the center;
9. Let's play the guitar again;
10. Lochimo (twist) the threshold.

We take the ideal sound

If you put the strings of the same caliber as the boules, then you don’t need additional adjustments. Ale, yakscho strings to twang, or a little too much roztashovani - varto to lift the neck, or to pull up the springs. So, it is necessary to regulate the height.

Fretboard regulation

The neck is regulated by an anchor, access to which can be lifted, fallow according to the model of that picker. Zdebіl'go vіn roztashovaniya at the "head" of the neck and most of the attachments with a decorative cap.

The fretboard is tightened by tightening or loosening the anchor behind the year arrow or against it.

The fingerboard is vvazhaetsya even, so when the string is jammed on the first and 17-19th fret (false type of guitar), the string should lie evenly and not twitch. There is no gap at the 12th fret, but if you mix it up, then you sound a little better. Otherwise, you can attach the metal line with an edge and twist it, so that it fits evenly to the edge of the line.

Height regulation on the breeches

Fallow in the sight of the bridge, raising the height of the air. Here you need to finish turning the support gwent, and here you raise it and lower the saddle of the bridge. Everything must be done for a comfortable grill and for the height of the weather, like a stink to derenchat.

Height is not guilty of shifting 2 mm at the 12th fret

Adjust the scale

What is a scale? The price of the strings is from the gap to the gap, and on the 12th fret there is the center. As the center of displacement, then the accuracy of the fret beats, and as if on the 12th fret the first strings may sound purer "m", then with a beaten scale there can be a note "re" or "m_ bimol". Vіdpovіdno on іnshih frets fret plivé.

The lashing of the scales is fixed by the saddles of the breeches, which are pulled up or loosened with a twist or a hexagon.

For accurate tuning, you will need an electronic chromatic tuner, for which you will need to adjust the scale.

1. Connected tuner;
2. Vіdbudovuєmo have a standard fret;
3. Zatyskaєmo on the 12th fret and smikaєmo її;
4. As the tuner's arrow moves in the direction of the norm, it turns the bolt. We marveled at the arrow, the show was painted - coolly in the same beak, poked - at the back;
5. Repeat until the best sound is eliminated.

How to see the scale, marveling at the video below

Come on, now the replacement of the strings will be more than a simple right for you. We have tried to make the most important in one recording, now it’s easier for you to remember the strings on your instrument, sing yoga, and enjoy the beautiful sounds

Povne vіdbudova guitar (Uvaga! Presence of profanity! 18+)

I believe everything, I tried to write a pokrokov kerіvnitstvo from stretching the strings on the guitar.

What strings are better to pull on the guitar?

First, what do you need to say about vibir strings for guitar, if you choosepull on the guitar - on the right, it is especially dermal, like to lie in the quality of the instrument and the special qualities of the one who plays on this instrument. The skin of a person can be likened to music. You can hіba scho rozіbrati yakі see the strings buvayut:

- Zhitlovi strings (strings are made from the creatures of the intestines), there is little space for the distant past. Qi strings maliwith the finest timbre. Alas, it’s a pity that such zhitlovsky strings played unhappily, and swayed swiftly.

- Synthetic ( nylon)strings(With the addition of special additives) may have a lot of advantages. It’s not so easy to squeeze to the neck, which makes life easier for a guitarist-pochatkivtsyu. And also these strings make a harp of dovgovіchnіst. The first three strings are synthetic (with various additives). Fourth, p'yata, shosta (bass) with a dart, ranks of cantle, increased longevity and sound.

Naigirshi nylon strings , like me pulling on the guitar tse Penza. After the tension, that lashing, the Penza strings at night raptom were torn by themselves.

- Metal strings at grі require a strong onslaught, lower synthetic ones. Obviously, the body of the guitar is guilty of buti settlements, which contribute to the sound of the guitar as a whole. On a classical guitar, it’s better not to beat such strings, so that the body can be warped.

Well, the z-axis was appointed with strings. Now you need strings stretch or replace on the guitar.

Let's get down to the uninterrupted stretching of the strings on the guitar.

As you pull the strings on the guitar, there is still no sound on them. It will be safer to follow in the following sequence:

Persha (E; mі) - Shosta (E; mі), Friend (B; сі) - П'ята (A; la), Third (G; сіл) - Fourth (D; re).

Sound on the guitar already є strings, more new ones. And just like the strings of the old and the filthy, it is necessary to replace them. The strings can be changed in different ways.

• You can once loosen all the old strings, and then we will know them well. So step by step, put the pressure on the bar.
• I change the strings step by step, one by one. I loosen the pershu (E) of the old string, I know її that I pull a new one. I take the same way for a friend, and step on the strings. I’ll forgive you the best way.

When replacing synthetic (nylon) strings on the first three strings, it is necessary to make a knot, so that it does not hang out of the loop. Bass strings wind up without a wuzlika, shards of gimp trimming a loop. There are bobs on some synthetic bass strings.

From the other side of the vuzlika, we stretch the string to the lower leg.

We leave 6-8 centimeters from the side of the knot.

We tie the loop. The node side of the string is skipped under the main string.

Now at the loop, which has settled down, our vuzlik is carried out, and we press the string with a finger into the nut of the saddle.

I tighten the loop.

They gave another end of the string to close at the peg mechanism. I am a millet string into the mechanism, quite deeply, if it happens, then wind it less. It is necessary to turn the peg mechanism in the same direction, so that later, when it is screwed, it will not break. I'm spinning around for the year's arrow.

It is also necessary to straighten the string on the back in one beat, on the first turn, on the other in the next. Tse to fight in order for the end of the string to appear, we will squeeze it under the winding rings of the string on the rings. It will be easier for you in this way, then change the strings, so that you won’t have a chance to rewind. It will be necessary to loosen the string more than good.

The first string is wound on the nearest keel, the other is a little farther away, then we will double the third. The other three strings (bass) I beat mirror-like.

Have you pulled the strings on the guitar? I got tired of playing the guitar.

Since all the strings have leaned on the guitar, you can tune them. But remember that the strings can stretch the power, especially the synthetic ones. So there is no need to exactly nalashtovuvati. You can repeat the lashing procedure after 5 (five) strands, then after 10 (ten) and so a few times until the strings are stretched again.

Our twitter: @instrumen_music

Vіtaєtsya vіlne rozpovsyudzhennya statti zі zberezhennyam authorship that sent to the site:

What do we need to replace the strings:
new set of strings;
key for guitar mechanics (key for winding strings);
wire cutters;
tuner or tuning fork;
straight arms and head with a strong mind.

The presence of a key for guitar mechanics does not mean that I will change the strings for you, but it is inexpensive to ask and speed up the whole process. Shmatochki are also neobov'yazkovі, the stench is necessary for tasting the inappropriate part of the string on the head of the fretboard on the remaining crochet. So the head of the guitar's neck looks beautiful and neat, the strings do not stray at a distance and chime one by one when lashed. Qi "surpluses" do not call for an hour gri, sipping into resonance. The stench will not tear the inner part of the case, or the wardrobe trunk will also fray the head of your guitar neck. I don’t care to twist the extra strings with a “ring” for the coryne, both in practical and in aesthetic plans. The string sings to break in the places, in which it is the most shaky to the point of rubbish. The lower and upper thresholds, the retainers, the lower ones - near the area of ​​the menzuri. And for that, a part of the string is missing, since the splitting can’t help us in any way, as we don’t choose to take up handicraft twisting or soldering. The only vipadok, if it can be brown, then the vipadok is "FloydRose". There, the string is placed with bolts from the side of the head. We may be able to unwind the “ring” and re-squeeze the string into the tailpieces. But this option is not comfy. Tse yak walk with a bare and thread, pin on the most prominent place of your robe, "zamіst brooches."
The string of the guitar will tremble in that vein, as your tuning pegs are set and twisted, well screwed to the tree and make a smooth, tight move. All must be checked periodically, because the tree to the tool “breathes”, the year shrinks, the splitting mechanism is rozbovtuetsya. The rule of good manners respects the progressive order of picking up and setting the strings: 6-3-5-2-4-1 (or 6-1-5-2-4-3), in order to allow the fretboard deformation to disappear, rozpodіlyayuchi more less equally stressed on the new . Especially, I will install it sequentially first and foremost, but I don’t feel any practical discomfort.
What is the cost of wrapping the splitting directly. Remember: knowing the string, the upper peg is wrapped around the year's arrow, the lower one is against the year's arrow. We put a string, wrapping the upper peg against the year's arrow, the lower one - behind the year's arrow. It is even simpler - we know the string by turning the peg "to ourselves", we put it, turning it "to ourselves". Tsey is directly framed in a non-violent way, because pull the string at your working position while standing, or sitting will be better for you.
Znyati strings can be omitted for replacement in non-transfer situations. You can twist one at a time, but I'm radical bi, like in D'Addario sets, two at a time (1-2, 3-4, 5-6). In this situation, you will not need a string for a change for a long time and you will not get lost when rewinding. I often twist everything myself.
Otzhe, the guitar lie on the lower deck, stand on the side of the upper part and sharply in the upper part of the headstock, the neck is on your left hand (you are right-handed).

Replacement of strings on electric tar.

With all the differences in the design of electric strings, string trimmers, we divide them into three types: the string is inserted without passing through the body, the strings through the body and the FloydRose type.
In the first and third options, the stretching of the last process was handy for us, so that the guitar lay on the lower deck. In the case of the “strings to a cross body” option, we happen to lift a tool in order to insert the strings and lay yoga again. Looking back at one particular feature, I will describe the process in detail. Details related to the peculiarity of "FloydRose" are visible to the eye.

We know the old strings.
1. Loosen the string by wrapping the pins. Robimo with the key for the guitar mechanics, more hands. Zupinyaєmos then, if calmly, without zusil, we can wring the string with the fingers from the opening of the peg.
2. We make a string from the opening of the peg.
3. From the side of the bridge pickup with your fingers, pick up the string, so that it comes out from the opening of the string trim.
4. We pull the string from the outer side of the string holder, trimming the bullet with the right hand, with the left “helping” the bent string in the peg area to pass through the opening of the string holder without crossing.
5. Now do not forget to put the guitar, fretboard, headstock in order, wipe it, turn over the fretboards. Evaluate the steel elements. About tse report in other articles.
It’s not enough to put a little bit of butt oil of graphite oil on the saddle of the bridge, slits at the top edge and retainers, tobto. the city has the most tertiary parts.

We put on new strings.

1. I dare you to open the string holder quickly, so that we don’t turn around until the end. Sound the bottom three strings neatly from the side of the lower horn, and the top three - from the side of the upper horn or the upper part of the guitar.
2. Prepare to open the pegs for the strings. For clarity, open in them to “marvel” at the fretboard of the guitar.
3. Now, one string at a time, we begin to seep into the opening of the stake. We marveled that the string was strong in the saddle, the slit of the nut and the retainer, pulling it up in front of the cim to the stop of the bullet in the stunotrimach. With your right hand, we trim the string so that the great finger was to the beast, and between the string and the frets were two of your fingers in the torso of one, the one in the middle. In this rank, you control the length of the string, as it is necessary to wind it. The second, no less practical option for choosing the length of the string to be wound, and the method of fixing it in the ring.

Lift the string with the left hand to the necessary length and begin to turn the pegs. We control the whole hour, so that the length of the string does not swell. If the string of the troch was hooked onto the peg (approximately p_voberta), with the pointed finger of the right hand of the troch, we pulled the string straight into the peg in the region of the first fret, so that the coils evenly kicked on the pin of the peg. On the splitting itself, at the first complete turn of the string, the last turn is to blame for the five steps of the offensive turn, tobto. stoop down below, so that the steps of the coils would trim the string, wanting more thoughts. As a result, you have thin strings without a winding due to the mother, two or three turns, reshta - one at a time, a single string can be mother and an incomplete turn, which is sufficient.
4. If all the strings are on, we need to make two speeches: sip them, so that they stink more trimmed the fret and twist again, so that the skin string lies in its place (bridge saddle, nut slit, retainer). We pull the string with the right hand just like it was when we pulled it: the great finger to the beast, the middle finger to the body of one finger from below. It's hard to climb uphill in different places of the menzuri, not afraid, scarlet neatly. This is why it is necessary that the new string can be correctly deformed and take its place on the cob.
5. We gave a tuner or a tuning fork and tuned the guitar.
Now let's talk about the features of installing strings from the FloydRose tremolo system.
Behind the great ruffle everything is identical, but the strings leak into the open bells, bullets are now on the head of the vulture. The last end of the string, behind the help of a hex key, is pressed in the saddle of the bridge, tasting parts without winding before it. For example, the installation of the strings is taut and tight. Repeat this procedure until you stop swimming. Then we tightened the top-locks with the key and, for the help of micro-under construction, we fixed it as accurately as possible.

I would like to turn your respect for two more important aspects.
1. As you virish put the strings of your comrade, you will inevitably have to correct the position of the “machine” and adjust the scale.
2. There is no practical sense to wind the whole length of the string on the peg. With bagatorase winding, the string is also zdіysnyuє ruhi on its axis, which leads to additional deformations, yakі does not put a coryne influx on the sound of that physical durability.

Changing strings on a dreadnought (western guitar)

The process of changing the strings on an electric and dreadnought winds up only to the strings from the bridge tailpiece (saddle) and to the installation of them. The design of the western guitar in the saddle is secured in such a way that the string is inserted into the opening of the saddle vertically and creaked when inserted into the opening of the so-called button or clatter with a groove for the string. "Iklo" is inserted with a groove up to the fingerboard. We make a string in the reverse order. There is a "click". For yogo viїmki on the best-guessed key for guitar mechanics, there is a special virіzka. Tse shvidko, zruchno that does not harm parts of the design of the guitar. In a different situation, you will happen to win victorious handicrafts and work with special care and neatness. When the string is struck. They gave everything similarly to the process for electricians.

Replacement of strings on a classical guitar.

When replacing the strings, you can use the following instruction:
1. Attachment of the strings to the base (bridge).

The diagram shows part of the bridge (bridge) and part of the string that is fixed. The vulture is located in the mountains.

2. Change the string so that the remaining turn of the string is beyond the edge of the bridge (bridge).

3. Fastening of strings to peg mechanics.
We sell the string twice in one opening to the beast down and wind it on the peg mechanics (div. video)
Play your guitars to the tune of your souls and breathe!

Axis, vlasne, and that's it!
Good luck to all!

The hour will come, and skin novice, some kind of mastering musical instrument, get stuck with a problem change strings on acoustic guitar. At first glance, everything is done prosaically, but in practice, a lot of guitarists-pochatkivtsiv give typical pardons, sometimes with deplorable traces. I will give a report on the development of the rule of replacing the old set with a new one.
Pochnemo pokrokovy analysis of the whole process.

View of the old set.

1. For the cob, it is necessary to loosen all the pegs, for a handy outer wrapper, add a turntable. The price of such an attachment is minimal, and the melancholy is maximum. Twist the pegs until the strings are completely weakened, the docks of the stench do not begin to sag freely.

3. In addition, as the strings were taken from the side of the neck, it is necessary to lubricate their z-pod plugs on the lower bridle. Wiymati traffic jams carefully, for the help of a special attachment. It is categorically not necessary to work with pliers or nippers, after such a short wear, on the pins (corks) or on the legs, you can lose track of the damage. Pіslya - remove the metal string from the opening.

Installed a new set.

First install a new set, do not forget to wipe the tool in especially sawn areas. Why clean the body and the fretboard with special tools to keep an eye on the acoustic guitar.

1. Let's get to the tightness of the new strings. The back is sold її (with the side de cot) in the opening of the saddle and tightly sealed with a cork.

2. Coming rock - close the string from the other side, for which it is pierced, open it at the point, so that the end looks no more than 7 cm lower.

3. Utrimuyuchi under the tightness of the tail - robimo one turn of the main part of the string on a peg, so that the veins appear to the beast. Dali, for additional twisting, the splitting is robimo more 1-2 turns, and then at the bottom under the tip.

Robimo tse in order to fix the strings with a minimum number of turns, to that we create a vuzol, which does not allow them to droop.

important to know.

1) Snack the strings, if they stink under tension - it’s fenced! Under an hour of the process, a string is bitten, you can hit it in the shortest time on the hands. Until then, sudden changes in tension can hurt the guitar neck.
2) Bagato vitkіv naughty pegs. Robimo no more than 4 on the first, and no more than 2 on the sixth.
3) If the string starts to create a tightness, we change the speed of the twisting of the pin, otherwise you can loose the pin.
4) At the same time, it’s not possible to create new strings once to the necessary sounds, otherwise the stench may break. Pulling on a tone, or even two less (for example, a caliber less than a “tens”), check 15-20 quills and get it.
5) The first few days the strings are still actively striving, so get ready for the post-building.
6) As the procedure is similar for you in the future, do not hurry with wire cutters to cut the “loop” string, it’s obvious that it’s out of place at the time of the nasty winding. Leave the tips for 1-2 days, cut off the string and re-tighten it again.
You will also have a corny article about those

Leather guitarist-pochatkіvets early chi pizno asks about those how to remember the strings on the guitar? Їx sound change, if the sounding is embodied and (otherwise) the stench ceases to subdue the harmony. As soon as one string burst, then remember everything more quickly, so that the sound of the new one will sound like others. Guitarists-amateurs sound change them once for three months, professionals - at least once a month. Sob, if the time has come, you need to listen to the sound of the guitar - the old strings will sound muffled.

Just like that string itself is constantly torn, and the style of the gri is not aggressive, next to turn over all the times of the dotik її with the guitar for smoothness. Like the guitar is often confused, it is possible that the reason is that the guitar strings are set incorrectly. Let go of the inconsistencies and then proceed to the restoration.

Before that, as remember the strings on the guitar, it is necessary, obviously, to be appointed, what type of stink you need. On the choice of strings they pour those in which style you are playing. For the grill, it’s better to use nylon ones with a brute force or a tremolo, vibrato and swidky passages. When the sound is played, if the sound of all six strings is needed at the same time, metal sounds will play.

Otzhe, let's look at the process, how to change the strings on the guitar. For this bazhano, but not obov'yazkovo mother: wire cutters, cloth for polishing, a turntable for kolkiv. Shmatochki are needed, so that you can cut a part of the string, because the one who is shortest will be less embarrassed. The turntable will speed up the process of tensioning.

In the process of stretching the strings, periodically pull them out of the fretboard, so like a guitar with stretched strings will not get confused for a long time. Don’t take all the old strings apart, change them one by one, so that you can get rid of the problems with the anchor shear. Be careful not to damage the body of the guitar.

After that, as you put the string through the opening at the bridge, pass it through the opening of the splitter, fill in a small margin for winding, and wind it with wire cutters. The stock can be tied for 2-3 turns. Bend 1-2 cm of the end of the string and start winding it, twisting the pegs and lifting it up the hill perpendicular to the fingerboard. Strum navkolok kolka organizovuvat is guilty of a lock of a singing kind. In such a rank, there is a yak bi to itself zashkaє.

Start from the natonsh string, step by step transitioning to the bass. It is necessary to turn all the pegs in one straight line, so that later, when tuning the guitar, we will not get lost. The extreme strings are stretched on the closest to the soundboard of the splitter, 2 and 5 - on the middle splitters, 3 and 4 - on the far ones. Do not break the sharp cracks when the string is pulled, so as not to break the її zovsіm. Remember, knowing how to change the strings on the guitar correctly, you will avoid a lot of problems.

Installing strings on an electric tara is something that is similar to this process on acoustics. There is only one main thing: to put the strings through the bridge, it is necessary to take the back cover of the guitar for additional twisting.

Let's proceed to tuning the guitar. With the particular accuracy of this work, it’s not varto, so that the strings (especially nylon ones) may stretch for power, the process takes about two days. The lashing of new nylon strings is turned upside down into a borosno: lashing out bass - thinly chuckle, and navpaki. Ale, everything is timchasovo. It is necessary after the skin approximate lashing to give the guitar to lie down, periodically pidlashovuyuchi її. Vikoristovyte either an electronic tuner or a tuning fork.

As a helper, you can use the Internet, where you can know a lot of video lessons, how to help unacknowledged and early guitarists to remember the strings.

Playing the guitar has become fashionable in the world of music, the strings of which shine, the very neon strings give the guitar a special chic, especially in a poorly lit room. Such strings shine under ultraviolet light, even more effectively, just as you perform on stage, then the same ones that you need.